Imported wear resistant seals M8x1 ed basic profiles: solid Ante imported wear resistant ed ring manufacturers for many industrial seals in one, as pipe fittings, hydraulic plug, transition joints and other special seals pneumatic fittings, than the traditional O-ring seal better. This elastomeric seal used as an axial static seal, used in the oil port and a screw thread ends, the section will remain almost constant at high pressure. Imported wear resistant ed ring M8x1 contrast advantages: a small section of the mechanical deformation no relative movement during the press cycle while maintaining excellent long-term sealing performance operating pressures up to 60Mpa imported wear resistant ed ring M8x1 commonly used materials: nitrile rubber (NBR) fluorine rubber (VITON) EPDM (EPDM) silicone rubber (VMQ) chloroprene rubber (CR) styrene-butadiene rubber (SBR) hydrogenated nitrile (HNBR) Ante solid manufacturers used imported ed ring size table SIZE Imperial Thread Size 8 - M8 * 1.0 6.5 * 9.9 * 1.0 10 G1 / 8A M10 * 1.0 8.4x11.9x1.0 12 - M12 * 1.5 9.8x14.4x1.5 14 G1 / 4A M14 * 1.5 11.6x16.5x1.5 16 - - M16 * 1.5 13.8x18.9x1.5 17 G3 / 8A G3 / 8 "* 19 14.7x18.9x1.5 18 - M18 * 1.5 15.7x20.9x1.5 20 - M20 * 1.5 17.8x22.9x1.5 21 G1 / 2A G1 / 2 "* 14 18.5x23.9x1.5 22 - M22 * 1.5 19.6x24.3x1.5 24 5/8 M24 * 1.5 21.8 * 26.9 * 1.5 26 G3 / 4A M26 * 1.5 23.9x29. 2x1.5 27 G3 / 4A M27 * 2.0 23.9x29.2x1.5 33 G1A M33 * 2.0 29.7x35.7x2.0 42 G1-1 / 4 M42 * 2.0 38.8x45.8x2.0 48 G1-1 / 2 M48 * 2.0 44.7x50.7x2.0 60 2 M60 * 2.0 56.5 * 66.5 * 4.0